The value of the corresponding instance of dot1dTpFdbAddress represents one of the bridge’s addresses. The value of the corresponding instance of dot1dTpFdbPort was learned and is being used. This entry is no longer valid (e.g., it was learned but has since aged out), but has not yet been flushed from the table. Is being used to determine if and how frames addressed to the value of the corresponding instance of dot1dTpFdbAddress are being forwarded. This would include the case where some other MIB object (not the corresponding instance of dot1dTpFdbPort, nor an entry in the dot1dStaticTable)
#Query switch for mac table snmp code
You need to use to match ifIndex value to MAC Address.Īnd finally, to get a Status code to each MAC address perform SNMP Get-Bulk Request for 1.3.6.1.2.1.17.4.3.1.3 Values returned represent IfIndex values for corresponding Interfaces associated with each MAC Address. To get list of associated Ports for each MAC address perform SNMP Get-Bulk request for “.1.3.6.1.2.1.17.4.3.1.2” If we take Decimal and convert to HEX, we will get 0:50:56:9C:45:71 If we take ASCII text (PVEq) and convert to HEX, we will get 50:56:9C:45:71
Notice that actual MAC Addresses returned look like some garbage characters but those are actually MAC address in ASCII format that needs to be converted to HEX to get a conventional xx:xx:xx:xx:xx:xx style. Here is the Example of output from our LAB Switch: To get list of MAC address perform SNMP Get-Bulk request for “.1.3.6.1.2.1.17.4.3.1.1” One of the ways to get list of MAC addresses from the forwarding table of Cisco switch is via SNMP MIB: dot1dTpFdbEntryġ.3.6.1.2.1.17.4.3.1.1 ( dot1dTpFdbAddress)ġ.3.6.1.2.1.17.4.3.1.3 ( dot1dTpFdbStatus)ġ.3.6.1.2.1.17.4.3.1.1 ( dot1dTpFdbAddress) contain list of MAC addresses in Binary formatġ.3.6.1.2.1.17.4.3.1.2 ( dot1dTpFdbPort) contain IfIndex value of the interface associated with each MAC Addressġ.3.6.1.2.1.17.4.3.1.3 ( dot1dTpFdbStatus) contain Status code which gives information how each MAC was learned by the switch. MIB browser is an indispensable tool for engineers to manage SNMP enabled network devices and applications.How to collect list of MAC addresses from Cisco Switch via SNMP (dot1dTpFdbEntry) MIB browser is an indispensable tool for engineers to manage SNMP enabled network devices and applications. IReasoning MIB browser is a powerful and easy-to-use tool powered by iReasoning SNMP API.
#Query switch for mac table snmp free
What it is - Getif is a free multi-functional Windows GUI based Network Tool written by Philippe Simonet.It is amongst other things, an excellent SNMP tool that allows you to collect and graph information from SNMP devices. However, because all we have to judge the OIDs meaning by is the output. For this device I get a total of 308 OIDs returned. In this example we're asking the snmpwalk tool to walk all OIDs starting from our base OID.1.3.6.1.4.1.318 (the fully qualified OID up to the vendor identification, which is 318 for APC). I'm trying to find the OID that will give me ports 1-48 in a list, and for each port, the MAC (or IP address) of the device connected to that port. I tried using the OID dot1dTpFdbPort but that seems to be giving me the MAC address of every device that's in communication with the switch, not just connected to it.
SnmpWalk is a command-line tool, which makes possible its use in scripts. This mainly refers to tables that are often used for presenting statistical and status information. This tool can efficiently get SNMP tables and read whole sections of variables.
0 kommentar(er)
